Super Easy Steps to Build You Own Wireless Charging Table

Are you interested in wireless charging table? Cord-cutting is the new trend. Wireless chargers are convenient, fast, and cable-free, which are ideal for public places like offices, restaurants, airports, train stations, and so on. While most of the products available on the market require cutting the furniture to integrate the charger into it, our stealth wireless charger saves all the hassle.

Our Qi-compatible stealth wireless charger can charge through any non-metal surfaces with the thickness between 15mm-30mm and 30-50mm (with a repeater). You can easily install it with any work surface or piece of furniture you would like. And it could charge any wireless charging enabled iPhones (7.5W), Samsung devices(10W), etc.

Follow the simple steps below, and you will have your wireless charging tables in just a few minutes!

1. FIND AN IDEAL SPACE

Find an ideal place for installation. It could be the office desk, restaurant table, saloon furniture, or even your kitchen island tabletop.

2. LOCATE THE INSTALLATION SPOT

Use the movable magnet and U-shaped cardboard with a fixed magnet to locate the installation spot.

3.STICK THE U-SHAPED TRAY

Remember the approximate position of the U-shaped cardboard and then move the cardboard and the movable magnet away. Tear off the paper on the surface of the U-shaped tray and stick it to where the cardboard was.

1: Make sure there’s room around the power port for the power cable to be plugged in.

2: Make sure there’s room for the wireless charger to be inserted into the U-shaped tray.

4.PUT THE STICKER ON THE TABLE

Align the cardboard with the tray and place the movable magnet on the table. Align the movable magnet with the center of the cardboard. Tear off the back film of the desktop sticker and align its center (lightning part) with the center of the movable magnet. Then slowly attach the sticker on the table and remove the movable magnet.

5.INSERT THE WIRELSS CHARGER

Remove the cardboard and insert the wireless charger into the tray (anti-theft screws are optional).

6.START CHARGING WITH THE WIRELESS CHARGING TABLE

Switch on the power and place the mobile phone center in the center of the sticker to start charging with the newly built wireless charging table (cable clips are optional to keep the power cable under the table clean and tidy)

With many gadgets available in the market today, a wireless phone charger is essential. Using one as opposed to the bulky wire that comes with most devices is very convenient. And the possibility that it could be installed under the desk and charge through a certain distance dramatically change the way you think about wireless charging. It saves you space and helps you make the tabletop clean and tidy.

Why not try building your own wireless charging table today? Contact us at [email protected] for assistance.

Any Questions?

[contact-form-7 id=”2499″ /]